T expand on my situation - My problem got much worse after I did the rebuild on
the master cylinder. I had pressure, but it would not hold, before my rebuild.
I have all new flex lines, rebuilt disks, (although rebuilt by me).
Before M/C rebuild - great action when bleeding.
After M/C rebuild - dribble at bleeders, strong squirt at ports at M/C.
Any further guidance?
Thanks,
Joe
--- On Mon, 6/29/09, Frank <spritenut@comcast.net> wrote:
> From: Frank <spritenut@comcast.net>
> Subject: Re: [Spridgets] No Brake pressure
> To: "Joe Lansing" <kidjoevid@yahoo.com>
> Cc: "Spridgets" <spridgets@autox.team.net>
> Date: Monday, June 29, 2009, 2:12 AM
> Joe Lansing wrote:
> > I just put disks on the front of my 62,
>
> Are the bleeder nipples in the correct holes on the
> calipers?
> I don't have one in front of me but there is a plug and a
> bleeder, if you mix them up, no squirt.
> How are the rubber brake hoses? If they are 10 years old or
> older, cut them and replace them.
> They tend to collapse in time and could burst when you hit
> the brakes.
>
> -- Frank Clarici
> Toms River, NJ
> My own Fleet of Sprites
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|