David,
There isa spring that the Micro Adjuster Nut has to keep tension on things. If
I loosned too much the spring could have jumped off. Time to pull the dizzy
and see what I find. Thnkas
--- On Sun, 8/30/09, David Lieb <72spridget@gmail.com> wrote:
From: David Lieb <72spridget@gmail.com>
Subject: Re: [Spridgets] Dizzy Question - 25 D and Micro adjuster - Vacumn
Advance
To: "James Gruber" <thistle_3619@yahoo.com>, "Spridgets"
<spridgets@autox.team.net>
Date: Sunday, August 30, 2009, 1:26 PM
> No I noticed that the vacumn advance does not seem to fit real tight into
the
> Dizzy, The whole housing can be pulled on and I can see the advance work
like
> it should but isn't the Vacumn Advance bolted or screwed in place somehow,
The
> whole thing moving around could be the reason I get erratic timing light
> readings and I've got no power and a back miss and backfire. My questions
is
> what holds the Vacumn Advance in place to the Dizzy?
James,
It is held in place by that micro-adjust nut. if it is sloppy, check
the points screws to make sure the plate moves freely. I believe there
should be a coil spring under that micro-adjust nut, although I cannot
see it in the Haynes or Bentley diagrams.
David L
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|