Andy,
Both - you should have 2 washers per caliper.
-=Chris
Chris King
http://home.comcast.net/~kvcbk/
<-----Original Message----->
>From: Andy Webster [a_d_webster@yahoo.com.au]
>Sent: 2/15/2010 4:20:14 AM
>To: spridgets@autox.team.net;spridgets-aus@yahoogroups.com
>Subject: Re: [Spridgets] brake question
>
>G'day...
>I am currently finishing of my Frontline suspension kit, installing new
>flexible brake hoses to the calipers..
>my question regards the copper crush washer that is on the banjo
fitting at
>the back of the caliper..
>Should the washer be between the banjo and the caliper, or between the
banjo
>and the head of the hollow bolt?
>logic says it shoul be between the bolt head and the banjo.. but i want
to be
>certain. My factory manual does not show a diagram including these
bits.
>
>almost ready to bleed the brakes and go for a test drive....
>
>Andy
>
>_______________________________________________
>
>.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|