I think you're close. The water condenses out at the bottom of the master
cylinder, froze and lifted the lip of the seal. ...bill in oregon
=========================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Frank
Sent: Thursday, February 25, 2010 6:42 PM
To: Mike Eldred
Cc: spridgets@autox.team.net; mgs@autox.team.net
Subject: Re: [Spridgets] Clutch Master Cylinder Barfing
Mike Eldred wrote:
> This is in my new-to-me '73 Midget. At some point over the colder months,
the clutch master cylinder leaked, spilling onto the driver's side footwell.
When I bought the car, DPO told me this had happened to him last winter,
too, so I was kind of expecting it. Any ideas as to what's going on?
----------------------------------------------------------------------
My best guess would be that the brake fluid has absorbed enough moisture
to freeze at a low enough temp and expand the cylinder bore.
I may be way off and we do have a thermodynamics engineer on this list,
(Ron) and maybe he can set it straight.
Or the seals are just shot and severely affected by the cold.
--
Frank Clarici
Toms River, NJ
My own Fleet of Sprites
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|