spridgets
[Top] [All Lists]

Re: [Spridgets] Need some ID help-

To: "Frank" <spritenut@comcast.net>, "Bill Masquelier" <billmasq@hotmail.com>
Subject: Re: [Spridgets] Need some ID help-
From: "Dean Hedin" <dlh2001@comcast.net>
Date: Mon, 5 Apr 2010 23:55:25 -0400
I'm sorry I thought you were talking about the clutch mounting to the flywheel.

----- Original Message ----- 
From: "Frank" <spritenut@comcast.net>
To: "Bill Masquelier" <billmasq@hotmail.com>
Cc: "spridget list" <spridgets@autox.team.net>
Sent: Monday, April 05, 2010 10:31 PM
Subject: Re: [Spridgets] Need some ID help-


> Bill Masquelier wrote:
>> I know that a 948 flywheel has 4 bolt holes and that a 1275 has 4 boltholes
>> and two dowel holes (to the crank) but what is the pattern for a 1098?
>>
>>   
> 948s & 1098s have 4 bolt holes.
> 1275s have 6 bolts and 2 dowels.
> The 1098 had a 7.25" pressure plate but I do know that there a 2 
> different 1098 flywheels.
> I found this out on the Holy Sprite and yes both 1098s were of the 
> smaller crank type. But 2 way different flywheels, the bolt pattern was 
> different.
> 
> -- 
> Frank Clarici
> Toms River, NJ
> My own Fleet of Sprites
> _______________________________________________
> 
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/spridgets/dlh2001@comcast.net
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>