spridgets
[Top] [All Lists]

[Spridgets] Weber 40 Carburetor to manifold gasket.

To: spridgets <spridgets@autox.team.net>
Subject: [Spridgets] Weber 40 Carburetor to manifold gasket.
From: <uniquelittlecars@yahoo.com>
Date: Sun, 25 Apr 2010 11:04:12 -0700 (PDT)
 
 
Yo British Xpert's,
 
As you can tell i decided to try the Weber 40 on the 1275cc motor to see how i
like it.
I went to a Weber boot camp yesterday. - 8 hours - you remove, clean all
parts.
Replace the gaskets, washers and other parts you may have been missing or
lost.
You can even bead blast your manifold - I did a few other parts i happen to
have in the car.
I will say it was a great crash course - Your mentally and physically drained 
the last hour.
 
I feel like the guy who could put together a gun blind folded.
Only with me it would be the Weber Carburetor. ( Well - Kind DA any way. ) 
So mine is all clean and Pretty now. I just need the gasket so i can give it a
try. 
 
I am looking for a Gasket that goes between the intake manifold and Weber 40
Carburetor.
The place i was at only had the Weber parts. All manifolds are not the same
 
The one that i am replacing has the following.:
 
The first side has - Warneford - Then the Borg Warner logo under it.
 
The other side has - REG. DESIGN
                                       70882
                               N0    70885
 
I have looked on line and do not seem to be able to find it.
I searched by name and numbers - no luck.
 
I did find a 866 number for a place that sells Weber Carburetors i will try
Monday.
I did not see the gasket for the Weber 40 Carburetor to manifold listed in
there catalog.
 
So i figured i would give the on line Xperts a go.....
Some one usually comes up with a source for most requests.
 
TIA  
 
Vigil
Your So Cal Pal
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>