I guess we'll have to put you on "the rack" to make your legs longer.
Instead of trying to move the pedal box, cutting sheet metal, filling new
holes, extending hydraulic lines etc, I would take out the pedals and modify
the arms. You can make pedal extensions that go directly on the pedal pads
or figure out how to add a piece of bar stock to extend the lower portion of
the arm where the pad attaches. This would be a cut and weld process, but
much quicker than trying to move the whole box. You'll have to figure out
something similar for the accelerator pedal.
Not necessarily easy, but doable.
Neil Anderson
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of
WeslakeMonza1330@aol.com
Sent: Monday, April 26, 2010 11:44 AM
To: billyzoom@billyzoom.com; spridgets@autox.team.net
Subject: Re: [Spridgets] Pedal box modifications
It's a racing seat and while it can go an inch further back my foot reach
will then be an inch too short.
In a message dated 25/04/2010 22:27:03 GMT Daylight Time,
billyzoom@billyzoom.com writes:
> would allow the seat to go further
> back and thereby allow a straighter arm position.
You don't normally have it all the way back?
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/neilandcustom@gmail.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|