spridgets
[Top] [All Lists]

Re: [Spridgets] Broken jet in front carb....

To: ryan.kubanoff@comcast.net
Subject: Re: [Spridgets] Broken jet in front carb....
From: Frank Clarici <spritenut@comcast.net>
Date: Sat, 05 Jun 2010 21:56:07 -0400
A new jet is available from list suppliers.
If you remove the Phillips screw that holds the choke linkage to thje 
jet, slide it down, then unscrew it from the bowl.
New jets are slightly different, better, they have a hose that goes on a 
barbed nipple so your problem will not happen again, or it will be a 
simple matter of pushing the hose back on the barb.
Barbed on the float end too.
  Much, MUCH better than original.

-- 
Frank Clarici
Toms River, NJ
Lots of Sprites
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>