Or a loose Panhard bar mount. A nut that can't be tightened without
disassembling most of the right side of the rear suspension, because
it's between the axle tube and the mounting bracket and
between the spring mount and upper control arm mount...
This also causes the rear to get a bit squirrelly..
also anonomous
Bugeyeracer
> Date: Thu, 17 Jun 2010 09:16:44 -0400
> From: mdrowe@optonline.net
> To: spridgets@autox.team.net
> Subject: [Spridgets] Caution
>
> That clatter in the rear when you hit bumps might not be the junk in the
> trunk.
> It might be that the DPO (Dumb Present Owner) forgot to completely tighten
> the bolts on the shocks when he put the rear end back together 2500 miles
> before!
>
> Anonymous
> _______________
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with
Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID2832
6::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|