spridgets
[Top] [All Lists]

Re: [Spridgets] Radiator temp gauge port size?

To: spridgets@autox.team.net
Subject: Re: [Spridgets] Radiator temp gauge port size?
From: BJNoSHOV8 <bjshov8@tx.rr.com>
Date: Sat, 16 Oct 2010 19:38:09 -0500
  I bought a replacement radiator for a Taurus about 10 years ago.  The 
drain plug that came with it didn't fit correctly.  I went back and got 
a different one and it didn't fit either.  I picked up a branch from a 
tree that was laying nearby, cut it off at a point that I thought was 
the right diameter, and screwed it in the hole.  That gave me an 
indication of the diameter and thread pitch, and I determined what plug 
it took from that.  I just bought a plug at the hardware store and put 
in it.  So the point is that you can figure out some material to put in 
the hole that will form an impression of the threads and go from there.



> Hello all,
>
> does anyone know offhand or have a way to measure what size and pitch of plug
> I could get to use in the port where the temp gauge bulb screws in?
>
> Thanks,
>
> Lester
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/spridgets/bjshov8@tx.rr.com
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.862 / Virus Database: 271.1.1/3201 - Release Date: 10/16/10 
>13:33:00
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>