Looks like they should be tied into the leads just off the indicator switch
http://www.spritespot.com/Downloads/Workshop%20Manual/Nc%20Wiring%20Diagrams.pdf
About a 3rd way down the page shows the 2 prong flasher with
separate indicator lights
Dave
At 11:27 AM 12/5/2010, you wrote:
>68 Midget, padded dash, 2 prong flasher.
>The external signals all work fine, they blink but the inside
>indicator bulbs do not blink.
>The bulbs have been tested and work but not when the signals are turned on.
>What controls the inside indicator arrow lamps? the wiring is the
>same color as the external bulbs and the diagram shows they are just
>tied into the external lamp wires.
>So why only the external lamps light up?
>I have tried a couple of different flasher units because I know the
>early cars use the flasher (3 prong) to power the single dash indicator lamp.
>Or do the later cars go thru the hazard switch which I bypassed on
>this car for now. I know the hazard has it's own flasher.
>--
>Frank Clarici
>Toms River, NJ
>________________
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|