spridgets
[Top] [All Lists]

[Spridgets] Wiring question 1500 Midget

Subject: [Spridgets] Wiring question 1500 Midget
From: 72spridget at gmail.com (David Lieb)
Date: Thu, 17 Feb 2011 19:06:59 -0600
References: <9229A6B3-179E-4A3B-86B2-DE2A29337371@gmail.com>
Yes. This wire is to bypass the ballast resistor while cranking the
engine. Similar to 70's GM cars, this allows them to produce a hotter
spark while cranking.
David L



On Thu, Feb 17, 2011 at 6:43 PM, Kevin Valentine <kevinv1275 at gmail.com>
wrote:
> Hey All,
>
> I'm working on a friends 1500 Midget.  I needed to replace the starter
> solenoid and removed the old one.  It has an additional wire running to it
> that the 1275 set-up does not have.  It's an additional spade connector on
> the solenoid that had a wire (white wit light green tracer) attached to it.
>   This wire has 12V when the ignition switch is on.
>
> Can anyone tell me what this wire is for?   In the wiring diagram I have
> it's not clear, but according to the diagram, it also runs to the coil.
> This car originally had electronic ignition but it has been converted to
> points and condenser.
>
> I have replaced the solenoid with a 1275 solenoid and did NOT hook up the
> wire in question.    Everything still works......
>
> Kevin V
> Tuscarora, Pa
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/72spridget at gmail.com

<Prev in Thread] Current Thread [Next in Thread>