spridgets
[Top] [All Lists]

Re: [Spridgets] Tires for Spridgets

To: an5.sprite@gmail.com
Subject: Re: [Spridgets] Tires for Spridgets
From: Hal Faulkner <frog.aye@gmail.com>
Date: Wed, 2 Mar 2011 11:03:15 -0800
My local LBC repair shop had a sprite using 14" minilites (or replicas.)  I
think they were originally sold to fit MGBs.  Said they were a straight
swap.
Hal

On Wed, Mar 2, 2011 at 10:41 AM, <an5.sprite@gmail.com> wrote:

> There was a thread recently that went through this. If you are using a
> tapered lug not you can get them to fit. It is not exact, 100m vs 101.4. If
> you are using typical square shoulder lug nuts, something has to be
> re-drilled.
>
> Steve
> ------Original Message------
> From: brian S
> Sender: spridgets-bounces@autox.team.net
> To: spridgets
> Subject: Re: [Spridgets] Tires for Spridgets
> Sent: Mar 2, 2011 12:53 PM
>
> Since the 13's are getting scarce,
> Has anyone been able to find out if the
> Miata Rims will fit a Spridget?
> They are 4x100 and come in 14-15-16 and 17 inch sizes.
> 14x6 IIRC for the smallest ones.
> I know a couple people weregoing to try it, but I don't
> anyone reported back.
>
> Brian S.
> Bugeyeracer finally resto'ed!
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/an5.sprite@gmail.com
>
>
>
> Sent from my Verizon Wireless BlackBerry
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/frog.aye@gmail.com
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>