Phil,
You have a couple of choices:
You thread the tie down through the wheels if they are not solid
You can also wrap a tie down over the circumference of the tires (best way)
Finally, you should be able to hook onto the welded bracket on the axle that
connects the spring to the axle.
Good luck
Steve
------Original Message------
From: Philip Nase
Sender: spridgets-bounces@autox.team.net
To: spridgets
Subject: [Spridgets] towing a Bugeye
Sent: Jul 12, 2011 8:09 PM
When towing a quarter elliptic spring car what do I use for a rear tie down
point? My brake lines run on top of the rear so that's out.
Phil Nase
Quakertown, PA
http://home.comcast.net/~philnasecpa/
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/an5.sprite@gmail.com
Sent from me.
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|