spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Spridgets] WAS: Hardening Steel

from [bjshov8] [Permanent Link][Original]
To: spridgets@autox.team.net
Subject: Re: [Spridgets] WAS: Hardening Steel
From: <bjshov8@tx.rr.com>
Date: Wed, 17 Aug 2011 20:52:52 +0000 
Lets take one of those axles down to 4K and then try to drill holes in the 
flange!

And depending on the outcome of that one, take it down about another 10 degrees 
and try it again.



> So we could put Peter in his Mini and take it to 4K
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Spridgets] WAS: Hardening Steel, Peter Caldwell
Next by Date:  [Spridgets] WAS: Hardening Steel, bjshov8 at tx.rr.com
Previous by Thread:  [Spridgets] WAS: Hardening Steel, Peter Caldwell
Next by Thread:  [Spridgets] WAS: Hardening Steel, bjshov8 at tx.rr.com
Indexes:  [Date] [Thread] [Top] [All Lists]