We have a fuel pump in stock which gives a pressure of exactly what the SU
carbs need and a flow of 100 - 120 liters per hour, which should be more than
enough even for high performance engines. It is a pusher.
It is 117.65 Euros (unfortunately about 160 US$).
Eric
Brits'n'Pieces
www.brits-n-pieces.com
On 11/8/2011 7:25 PM, jmj3351@comcast.net wrote:
>
> The airtex fuel pump is made in China and marketed under a dozen
> different names. I used it to replace my noisy Holley. It lasted less
> than 200 mi. and left me setting. They replaced it under warranty and
> I carry it as a back-up. I have a Delco EP42S running without a
> regulator and it has a thousand mi. with no problem. It is quiet and
> it runs 4.5 pressure at the carb. It costs a little bit more but it
> was worth it to me. I would never trust the airtex again.
>
> John-Green midget and several others.
>
> ------------------------------------------------------------------------
>
> *From: *"ryan kubanoff" <ryan.kubanoff@comcast.net>
> *To: *"Robert Weeks" <lists@woozy.com>
> *Cc: *spridgets@autox.team.net
> *Sent: *Tuesday, November 8, 2011 6:08:01 PM
> *Subject: *Re: [Spridgets] need a new electronic fuel pump.
>
> Was there an issue with these?B I kinda thought someone had posted
> that there
> was a bad batch of them on the spridget list.B Also is that mounted
> by the
> fuel tank or up by the carbs?B I need one by the fuel tank (pusher I
> think).
>
> Thanks
>
> Ryan
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|