spridgets
[Top] [All Lists]

Re: [Spridgets] Troubleshooting..

To: Dean Hedin <dlh2001@comcast.net>
Subject: Re: [Spridgets] Troubleshooting..
From: Kevin Valentine <kevinv1275@gmail.com>
Date: Sun, 17 Mar 2013 10:51:38 -0400
Cc: Spridgets <spridgets@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: spridgets@autox.team.net
References: <5A90AB4C81ED4A308A9E74ECE96BAA7C@blackbox2>
Dean,

A leak-down compression test will tell you if you have a problem with the
head gasket (before you rip the head off ;)

Kevin V.
Tuscarora, Pa



On Sun, Mar 17, 2013 at 10:44 AM, Dean Hedin <dlh2001@comcast.net> wrote:

> Last year before I buttoned up the Sprite for winter I took it for a usual
> weekly ride.
>
> About 4 miles from home I was waiting to get around a tree service crew.
> As I passed them the car began to stumble an run really rough.  It felt
> like
> it was running
> on two cyclinders along with a pinging type of sound.
>
> I limped home and parked the car for winter.  I figured that perhaps
> something was wrong
> with my home brewed MSD box.  I would deal with it in the Spring.
>
> So today I'm out troubleshooting the thing.  I started by making a little
> harness that allows
> me to swap out the MSD box.  I figured this is a good thing to have anyway.
> But the MSD box
> was not the issue.  In fact spark is not the issue. Plenty of spark on
> every
> cylinder even without
> the msd box.
>
> It seemed like at idle, I could pull cylinders 1 & 2 spark plug boots and
> not see an appreciable
> drop in rpms. So I thought maybe something was wrong with the front SU
> carb.
>
> I opened and drained it's float and removed the bell.  I then took canned
> air and reverse blew
> through the main jet to make sure the tube was not clogged.
>
> That was'nt it.
>
> Now I'm worried, so I pull the valve cover to make sure none of the rocker
> adjuster had'nt worked
> loose.  No problem there...
>
> So now I'm thinking either valves or head gasket.  But the failure was
> sudden.  Has to be head gasket.
>
> I Googled "symptoms of blown head gasket between cylinders" and I find
> this...
>
> http://retrorides.proboards.com/index.cgi?board=general&action=display&threa
> d=102462
>
> Which has a link to this video on youtube...
> http://www.youtube.com/watch?feature=player_embedded&v=k1zNcXUq834
>
> Which is almost EXACTLY what my Sprite sounds like right now.
>
> Guess I need to finish up that 12G295 head in a hurry. Ordered all the
> bits.
> Need to get this done
> before the 55th shindig...
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/kevinv1275@gmail.com
------------------------

spridgets@autox.team.net


Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>