Should work fine Brad. But don't tell Dean what you're doing. :-)
Sent from my keyboard
On May 4, 2013, at 6:45 PM, Brad Fornal <tequila.brad@gmail.com> wrote:
> Now that Texas has decided to bless us with warmer weather again, I went
> out to see if I could resolve my ignition light issue. I removed the cover
> off the voltage regulator, and found both coils to be horribly burned, and
> on the bottom coil, the bouncing plate, that the points work with, is
> broken loose.
> I dug into my parts bins, and found a regulator from a 58 Sprite that I had
> parted out. Will this work as a bolt in replacement?
> Thanks in advance
>
> Brad
>
> --
> DON JULIO 1942
>
> http://tequilabrad.com/
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
|