I would get AN threaded fittings from _www.aircraftspruce.com_
(http://www.aircraftspruce.com) I'd expect (without checking you need an NPT
at the
end that screws into the pump that has -6JIC at the other end. Then I'd get
a 90 degree or straight threaded fitting that is -6 JIC at one end and a
barbed fitting for rubber hose at the other end.
Variations on this theme would be a small dash size on the adaptor and thus
the 90 degree etc.
In a message dated 12/08/2013 16:03:17 GMT Daylight Time,
bertshirey@zoominternet.net writes:
The Facet pump has 5/16" fittings. I should know, but this looks larger
than what`s there. Before I cut line and end up replacing the whole
business,
what is the size of the stock solid fuel pipe on the Bugeye? If 5/16" is
too
large, is there a way to adapt to a smaller pipe?
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
|