tigers
[Top] [All Lists]

Let's talk about wheel hop

To: dbinkley@argotech.com, tigers@Autox.Team.Net
Subject: Let's talk about wheel hop
From: BMcgu22954@aol.com
Date: Fri, 7 Aug 1998 19:54:52 EDT
The posi should fix most of the wheel hop. (It did for me)
My car had the weld on traction bars when I bought it.
I converted them to the bolt on type by using the rear bracket, and made the
tubular part like shown on Norms' page. I made my own bushings out of  some
UHMW I had at the shop. 
Basically, I measured Terry Taylors for length and angularity, and went from
there.
Rick should have replacement bushings for the panhard rod.

Bruce McGuire

<Prev in Thread] Current Thread [Next in Thread>
  • Let's talk about wheel hop, BMcgu22954 <=