Tigers,
I located the original box for the small coolant recovery
container that fit between my expansion tank and the radiator
/ shroud.
It is made by Interdynamics, Brooklyn, NY 11232. It is 1 1/2
qt. capacity, Model MCR-3, and is quite thin. 6 inches long by
3 3/4 inches thick, and 7 1/2 inches high. This can be turned
in multiple directions, and comes with mounting kit and hoses
for about $6. I wouldn't use the cap, however.
This is the same model that I paralleled under the left front
fender, but the filler is inaccessible. Since they are “T’d”
at the bottom, they are filled by the inside one. Only one
fluid level, so they need to be near the same height.
The cap I am using is the 13 psi Stant Lev-R-Vent type, with
the lever to release pressure before the cap is removed. You
only need be scalded once to know this is what you should
have. Its model number is 11329. Both items are made in the
USA, and came from Pep Boys, although carried by many other
outlets nationally.
Hope this helps.
Steve
--
Steve Laifman < Find out what is most >
B9472289 < important in your life >
< and don't let it get away!>
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|