Re: Clutch Master Cylinder Rebuild Kits

[RayKReese@aol.com]

Hal: Rebuilding a cylinder is one of the simplest things you can do. You get 
pretty immediate gratification too! Just make sure that the bore is not 
pitted, use a cylinder hone that you can buy at any parts store and 
thoroughly clean the bore before and after you hone it. Also, use lots of 
clean Girling brake fluid while honing and when assembling the new parts, and 
don't forget to use the Girling red rubber grease as well! Don't be shy, it's 
fun!!!

Ray
B9473174