tigers
[Top] [All Lists]

Re: Advise re:500 vs 600 CFM Carb Query

To: "Daniel S. Eiland" <deiland1@elp.rr.com>
Subject: Re: Advise re:500 vs 600 CFM Carb Query
From: Steve Laifman <Laifman@flash.net>
Date: Sat, 26 Aug 2000 10:13:16 +0000
"Daniel S. Eiland" wrote:

> Hi Mark,
>
>     From what I can tell you are referring to the Holley 0-9776 which is
> listed by Holley as a Model 4160 at 450cfm. Hope this helps.
>
> Dan

Mark,

That model is recommended as one of a pair on dual-quad manifolds.  The model
4160  465 CFM 4 bbl is a better fit for a 260. Came with one of the LAT kits
and is still being made.  Whose manifold you are using will determine if you
have a PCV inlet problem.




--
Steve Laifman         < Find out what is most    >
B9472289              < important in your life     >
                         < and don't let it get away!>

http://www.TigersUnited.com/gallery/SteveLaifman.asp

_/_/_/_/_/_/_/
     _/                 _/_/_/       _/_/_/       _/
    _/        _/      _/     _/     _/    _/     _/_/_/_/
   _/        _/       _/    _/      _/  _/      _/
  _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
                            _/
                     _/_/_/



<Prev in Thread] Current Thread [Next in Thread>