I found a way to thread through the hose that sounds as though it's
easier -- I stuck a piece of coat hanger wire into the first 10" or so of
tubing, put a light under the hood and threaded the now stiff wire/tubing
through towards the light.
Duncan
>Try your local hardware store. Take the old fitting
>along. Do NOT remove the old hose. You can tape
>the new hose to the old and pull it through the
>fire wall. If you have already remove the hose it
>gets a tad bit more difficult. It seems the hole in
>the firewall does not line up with the hole inside.
>I tied a loop in a string and the tied it to a bent
>clothes hanger. Then inserted the whole mess
>from the inside. Looking in the hole from the firewall
>I finally found the loop in the string. Snagged it with
>another clothes hanger. One the string is through
>you can tape it to the new hose and pull it into the
>car.
>
>Hope this helps
>
>Dave Johnson, B382002668, Aurora, IL
|