RE:Carb adjustment

["enof" <enof@earthlink.net>]

:o) From: DJoh797014@aol.com
:o) Subject: Re: Carb rebuild questions
:o) Then with a warm engine and idle
:o) speed of about 600-700 rpm use a vacuum gauge
:o) to achieve maximum idle for each screw.  You can
:o) temporarily use the PCV vacuum port at the base
:o) to attach the gauge.  

can yu 'splain in more detail
say
then play with the screws til you get Max Suck from the
PCV port? 

enof
B9472075