Chris,
Can't speak for every one else, but in my car the lower hose connector at
the radiator nearly touches the frame rail. There is just barely enough
clearance to get the lower hose on, and really a bear to get the clamp on
after....but it can be done.
Hope this helps.
Allan
-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net]On
Behalf Of Chris Mottram
Sent: Saturday, December 29, 2001 9:14 AM
To: tigers@autox.team.net
Subject: Raditor Hose Clearance Help!
Hi all,
I am in trying my best to re-assemble the Tiger over
the next week. Since my body guy replaced the front
frame rails and did SOME correcting of previous front
end damage, things are not fitting together like they
did when I took it apart. Is the lower radiator hose
supposed to touch the frame rail? If not,
approximately how much clearance is there? I can
shift the radiator if I elongate the mounting holes.
Please respond to me directly, I am on the daily
digest and I want to finish up the engine compartment
today. Replies tot the list may not show up for a day
or two.
Thanks,
Chris
|