Gary, the PCV valve fits into a rubber grommet in the valve cover.Going
toward the carb. 1st its screws into a brass elbow which connects to a black
hose with a hose clamp on each end this goes into carburetor spacer.I can't
recall any hose except brake booster hose with a yellow stripe as you
describe.Joe S.
----- Original Message -----
From: "Gary Winblad" <garywinblad@attbi.com>
To: "Steve Laifman" <SLaifman@socal.rr.com>; <DragRacinTiger@aol.com>
Cc: <tigers@autox.team.net>
Sent: Thursday, April 10, 2003 6:54 PM
Subject: Re: original pcv valve
> Steve, I think you are confused with the yellow striped brake booster
vacuum
> hose.
> But you are correct about the PCV valve. I will add that it screws into a
> brass right-angle hose
> fitting.
>
> Gary
> ----- Original Message -----
> From: "Steve Laifman" <SLaifman@socal.rr.com>
> To: <DragRacinTiger@aol.com>
> Cc: <tigers@autox.team.net>
> Sent: Thursday, April 10, 2003 3:38 PM
> Subject: Re: original pcv valve
>
>
> > The original pcv hose has a yellow stripe. The original PCV (valve) is
> > metal, and can be unscrewed for cleaning all the insides. Not a
> > throw-away, although too many have.
> >
> > Steve
> >
> > DragRacinTiger@aol.com wrote:
> >
> > >what does it look like? i am moving and cleaning out the last of my
tiger
> > >parts. i came across a pcv valve that i saved. it may be original or it
> may
> > >not be. how do i tell? it is on an original pcv hose with pinch clamps.
> > >thanks
> > >chris
> > >
> > >
> > >
> >
> > --
> >
> > Steve Laifman
> > Editor
> > http://www.TigersUnited.com
|