tigers
[Top] [All Lists]

RE: tonneau cover question

To: <PhastPhill@aol.com>, <tigers@autox.team.net>
Subject: RE: tonneau cover question
From: " Ron Fraser" <rfraser@bluefrog.biz>
Date: Mon, 9 May 2005 21:27:05 -0400
Phil
        There are at least 2 different styles; one uses the demister vent
holes for the studs, the other has studs located about 2 inches up from the
vents, 2 in the middle and 2 far outside.  I'm not sure you can see the stud
locations without removing the dash.  My Tiger is not in a position where I
can open the door and look under the dash.   Removing those black finishers
will not help you see the stud locations.

Ron Fraser

-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net] On
Behalf Of PhastPhill@aol.com
Sent: Monday, May 09, 2005 6:13 PM
To: tigers@autox.team.net
Subject: tonneau cover question


Tires are on order, next prob to address is the shrunken soft top. I have a

new Robbins top now and am getting organized to have it installed just
after 
the tires. So far so good. I would like to have a tonneau cover as well. I
do 
like to use the car for everyday errends and find a tonneau handy when you  
leave the car at the grocery store parking lot. Or pop into the pub for a
beer. 
 Now the problem, the last owner never had one, and never left the cars side

I  guess because the soft top did not fit and he never had the hardtop on.
Car 
has  a new dash and dash pad, etc.....very nice looking.....NO TONNEAU STUDS

ON THE  DASH. Now what the heck do I do, take all the dash and dash pad and 
stuff apart  again?. There appears to be looking from underneath, some kind
of 
black  finishing cardboard held in with small rivits. Would removing this
stuff 
show  the the location of the old holes? They have to be some bloody where. 
Or I have  read of using the back screw holes of the demistor vents as a 
location for screw  in studs???
   Also want to thank Nick Kintner for his time. Before I left  Fla with the

car I shot two rolls of film of underneath detail stuff. Nick the  shots
came 
out great. First time I took the right engine mount off I knew just  what
was 
where, no worries. Now this lack of studs in the dash looks alot more  of a 
pain......any ideas  anyone....?thanks.....cheers.....phil


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 5/6/2005





<Prev in Thread] Current Thread [Next in Thread>