tigers
[Top] [All Lists]

RE: Ammeter Question

To: "Theo Smit" <theo.smit@dynastream.com>,
Subject: RE: Ammeter Question
From: stubrennan@comcast.net
Date: Thu, 04 Aug 2005 18:57:53 +0000
A couple more thoughts:

You will have more reliable connections if you solder them, including soldering 
to the Ammeter contacts.  If you can't do it, I'm sure you know an electronics 
geek who can.  You could use the push on contacts until you are sure you have 
the polarity right, then solder them in place.   Solder the "crimps", too.

Make sure your new wiring is well insulated and not laying against any sharp 
metal edges.  A sharp edge can eventually penetrate the insulation and make 
life just a little too exciting.  Remember, there's unfused battery power 
always available in this lead.

Stu





<Prev in Thread] Current Thread [Next in Thread>