Peter,
Was your clutch always low or did it just suddenly drop? I ask this as I
had incorrectly installed my brake and clutch push arms. There are two
holes in the arm to locate the pushrod. Relocating the arm to the most
forward hole made ALL the difference as I thought I had burnt up my
clutch and the brake engaged low. When I relocated the push arm to the
most forward slot it solved everything ... worth checking out if
everything works fine otherwise.
Best Regards,
Tim Ronak
Business Development Manager
Akzo Nobel Coatings
23961 Via El Rocio
Mission Viejo, CA 92691
Off: (949) 305-5393
Fx: (425) 955-6268
Cell: (949) 289-3357
Business email: timothy.ronak@crna.akzonobel.com
Personal email: timronak@cox.net
VM: (800) 234-6747 ext. 2257#
This message, including attachments, is confidential and may be
privileged. If you are not an intended recipient, please notify the
sender then delete and destroy the original message and all copies. You
should not copy, forward and/or disclose this message, in whole or in
part, without permission of the sender.
|