Re: re-rivetting window regulator

[AAAGLASSS@aol.com]

The c/balance spring goes in the slot on the rivet. You don't want to  deform 
this slot by peening down the other side use an old socket or pipe to  
support it on the rim of the slot side and peen the other side to get a snug 
fit  in 
the hole. It looks like you have to have special tools to get the factory  
peen. After you peen it Mig weld it to the fan.  I won't tell any body so  you 
shouldn't loose points at a car show. These regulators show up on e-bay  every 
once in a while.  HTH