I ordered a set from http://www.wheeladapter.com/ . Fred Goeske was great to
deal with and provided a great product custom made to exactly what I needed.
----- Original Message -----
From: "James E. Pickard" <geowiz.sgy@cox.net>
To: "Tiger List" <tigers@autox.team.net>
Sent: Wednesday, February 13, 2008 9:32 PM
Subject: [Tigers] SS wheel spacers
> OK, installing longer lug bolts is going to be far more difficult than I
> imagined. First of all, I have to remove the rear hubs, which requires a
> special tool I'll have to fabricate. But even worse, apparently longer
> lug
> bolts are not available that are the same diameter, requiring the hub
> holes to
> be drilled out to a larger size. There is a spacer available with
> built-in
> bolts, but this one is 1" thick and won't fit under my stock non-flared
> fenders.
>
> So, my question is: are the stock lug bolts long enough to safely use
> when
> installing Rick's 1/4" spacers? I have 14" Panasport wheels and I only
> get a
> few turns on each lug nut before I get some resistance. I can get a
> couple
> more turns when I tighten them up. Is that enough? Is anybody else using
> this set-up? Or is this more dangerous than not using the spacers at all?
>
> Jim Pickard
> B9473298 ('65 Tiger)
> AN5L/12109 ('59 Sprite)
> 2003 Mini Cooper
> Lafayette, LA
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as jimsnell@qwest.net
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|