Seems to me that if you're going to get into a position to see if there are
recessed areas on the block in that location, wouldn't you just count the
bolts and know for sure???
----- Original Message -----
From: "Teepen, Jere" <jteepen@usatoday.com>
To: <AAAGLASSS@aol.com>; <tigers@Autox.Team.Net>
Sent: Wednesday, July 30, 2008 4:25 PM
Subject: Re: [Tigers] Tigrt 260 blocks
>I have been told by a knowledgable source that the 5 bolt blocks (260 and
>289)
> have a recess in the area behind the intake manifold and between the
> cylinder
> head surfaces. On 6 bolt blocks this area is flat. Determining which
> area is
> on the block will help narrow down the possibilities.
>
> Jere
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|