After spending 12 hours in an alignment shop with a spotty 20 year old
cursing my car I decided to do it myself. Takes time but you get good
results.
On 8/28/08, Harry B. Elam <harryb@elams.org> wrote:
> I have replaced the worrisome lower "A" arm supports with new ones from
> Doug Jennings. The old ones seems OK but after 200K miles, it seemed
> prudent. I have had the suspension supports required by our "Shop
> Manual" produced in steel up front and wood aft, as suggested. Then I
> had the front suspension aligned exactly as our manual suggested. The
> mechanic reported that it was difficult to get everything within
> "specs." The car drives great and I am pleased but I wonder what
> everyone else is doing. Suggestions appreciated. BTW- the alignment
> pieces are available for loan if someone wants to try my process.
>
> Harry Elam
> B382000471
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as owain.lloyd@gmail.com
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|