tigers
[Top] [All Lists]

Re: [Tigers] Machine shop questions

To: "Tigers" <tigers@autox.team.net>
Subject: Re: [Tigers] Machine shop questions
From: "Bob Hokanson" <tgrrr@peoplepc.com>
Date: Tue, 16 Dec 2008 12:42:30 -0800
On page 20 of George Reid's book, "High Performance Ford Engine Parts 
Interchange", he states the following:

"Though 302 blocks looked virtually identical to the 289 block, the cylinder 
bores had extended skirts to handle the 302's .019-inch longer stroke. This 
extended cylinder skirt reduced piston slap and improved stability for 
quieter operation."

On the same page under a photo caption he also says:

"The 302 block differs slightly from the 289, yet both are interchangeable. 
We suggest the use of a 302 block with 289 internals, but not the 289 block 
with 302 internals, due to the increased stroke. The 302 block has slightly 
longer cylinder wall skirts to accomodate the small increase in stroke 
length. This reduces piston skirt noise and play at the bottom of the bore."

Caveat emptor. 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>