Joel
Length = about 3.5" out of the radiator; not sure how much tube is inside
the radiator; I guess at least 1/4"
Diameter = 5/16" tube
Angle looks a little short of 90, maybe 85 degrees @ about 1" out of the
radiator
The tube should be angled toward the overflow tank tube; also note that a
somewhat shorter tube will give you a little more access to getting the
rubber hose onto these metal tubes; a longer tube will make getting the hose
on more difficult
Ron Fraser
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Joel Martin
Sent: Tuesday, August 03, 2010 1:40 PM
To: tigers@autox.team.net
Subject: [Tigers] Radiator Overflow Tube
What is the correct length, diameter and angle of the radiator overflow tube
coming out the drivers' side top portion of the radiator for a 1966 MK1A? I
will need to add this overflow tube when the radiator is repaired.
Thanks
martjr
_______________________________________________
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|