tigers
[Top] [All Lists]

Re: [Tigers] Wiper motor wiring

To: Tigers@autox.team.net, Bob Dixon <bobdixon@frii.com>
Subject: Re: [Tigers] Wiper motor wiring
From: Tony Somebody <achd73@yahoo.com>
Date: Tue, 1 Feb 2011 22:34:57 -0800 (PST)
Bob- CAT sells a great laminated wiring diagram. I highly reccomend it for any
Tiger owner, except you more fortunate Mk2 owners as Mk1 is on one side and
Mk1a the other. The wipers do operate thru the ground IMS. The gren wire is
from the fuse block. There is a ground wire on both the motor marked as E and
the switch, The two wires, Brown /light green & Red/light green plug in at the
motor and go to the switch. The switch also has a black wire going to
ground.The switches have numbers on the back and althoughh there are 8 numbers
the switches have 5 lugs. Now all switches might not be the same but the two I
have in my hand show #1 at the top and Im going by the 2 holes in the switchs
face to refer to the switch as the 2 holes being at the top with the switch so
turned. 2 is blank beside of 1,
3&4 is the top lug on th back and 5,6 the next one down and at the bottom 7 is
on the right and 8 the left and that is looking at the switch as tho in the
dash. the drawing shows the brown with lg stripe on lug 4. The red with lg
stripe shows it on 1,2,3 and 7. I imaangine there is continuiy between these
lugs and the ground goes to number 6. Hope this helps.
The drawing also states this switch as being up side down, so #1 and the 2
holes in the front of the switch are both at the bottom.

--- On Tue, 2/1/11, Bob Dixon <bobdixon@frii.com> wrote:

> From: Bob Dixon <bobdixon@frii.com>
> Subject: [Tigers] Wiper motor wiring
> To: Tigers@autox.team.net
> Date: Tuesday, February 1, 2011, 11:08 PM
> I'm having trouble figuring out how
> the wiring is supposed to go on my wiper motor.  I
> didn't do a good job of lableing wires when I took the car
> apart years ago.
>
> > From my workshop manual it looks like:
> Green - V+
> Black - Ground
>
> Brown/LightGreen and Red/LightGreen go to the wiper
> switch.  The switch looks like it connects to ground.
>
> So.. does this thing work by grounding either Brown/LG or
> Red/LG?
>
> Thanks for the help.
> Bob
>
> PS - currently here in Longmont Colorado it is -8F brrr (it
> was 64 on Friday!)
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/achd73@yahoo.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>