tigers
[Top] [All Lists]

Re: [Tigers] Exhaust Manifold question

To: e.coiner@cox.net, Tigers <tigers@autox.team.net>, George Re
Subject: Re: [Tigers] Exhaust Manifold question
From: David or Gary Franchi <wwwdg@webtv.net>
Date: Thu, 23 Jun 2011 01:58:20 GMT
Since you have it off, I would heat the area around the tube with a torch, then 
try and wiggle the tubes loose.
David


-----Original Message-----
From: e.coiner@cox.net
Sent: Wednesday, June 22, 2011 11:11 AM
To: Tigers, George Re
Subject: Re: [Tigers] Exhaust Manifold question

Its a press fit.  Grab with pliers and pull with a gently rotating motion.  
Most likely they are rusty and will snap off.
Then you drill them out and get a replacement kit from any Mustang supplier.

Erich
---- George Re <mgman71@comcast.net> wrote: 
> I am just about to send my manifolds out for coating but have run into a 
>small problem. There are 2 tubes on the Right manifold one goes to the choke 
>and one goes to the bottom of the air cleaner HOW do you remove the tube (the 
>one that goes to the bottom of the cleaner) from the manifold? I have no idea 
>and can not find any info on it. Thanks in advance 
> 
> George Re 
> _______________________________________________
> 
> tigers@autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/e.coiner@cox.net
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/wwwdg@webtv.net
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>