tigers
[Top] [All Lists]

Re: [Tigers] 260 big end bolts

To: "'michael king'" <michael.s.king@gmail.com>, "'Tiger Talk List
Subject: Re: [Tigers] 260 big end bolts
From: " Ron Fraser" <rfraser@bluefrog.com>
Date: Thu, 23 Feb 2012 08:39:04 -0500
Michael

5/16 bolts was used for all Std 260 and 289 connecting rods

3/8 bolts were used for Hipo engine connecting rods

I would not think any Tiger 260 engines received Hipo rods with 3/8 bolts
but it is not impossible either.

Ron Fraser

-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of michael king
Sent: Thursday, February 23, 2012 12:58 AM
To: Tiger Talk List Tiger
Subject: [Tigers] 260 big end bolts


Quick question to the list..

There is a book "how to power tune the ford v8" in the book it mentions that
the 260's used 2 sizes of big end bolts. They say the early 260's used 5/16
bolts and the later 260 used 3/8.... do we know if any of the tigers used
the 5/16? I would assume by later tiger production they are 3/8... but
anyone know/experience a tiger with the 5/16?

--
Regards

Michael King
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>