tigers
[Top] [All Lists]

Re: [Tigers] Tiger Gen pulley size

To: "'wseay'" <wseay@embarqmail.com>, <spmdr@juno.com>, <tigers@autox.team.net>
Subject: Re: [Tigers] Tiger Gen pulley size
From: Ron Fraser via Tigers <tigers@autox.team.net>
Date: Wed, 8 Apr 2015 17:49:24 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: tigers@autox.team.net
Importance: Normal 0.0.0000 definitions=2015-04-08_07:2015-04-08,2015-04-08,1970-01-01 signatures=0 suspectscore=0 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=7.0.1-1402240000 definitions=main-1504080180
Thread-index: AdByOakhbU9xz0FUQmGFwU2x7CdpZQACoRoQ
Will
        The key to this is knowing the Ford marking on the Tiger pulley.

According to Bob Mannel's book the C2OF-10130-A pulley should have C2OF-A
stamped into it.

Is that correct or is there another number or no number?

The Tiger pulley should be a standard Ford part if it has Ford Markings on
it.

The Tiger generator bracket is unique to Tiger and is a non Standard Ford
part.   There is no cast in part number or Ford logo on the Tiger part.

Ron Fraser

-----Original Message-----
From: Tigers [mailto:tigers-bounces@autox.team.net] On Behalf Of wseay via
Tigers
Sent: Wednesday, April 08, 2015 2:32 PM
To: spmdr@juno.com; tigers@autox.team.net
Subject: Re: [Tigers] Tiger Gen pulley size


Here are pictures of my OEM Tiger generator and the "dime test" applied to 
the pulley.
It's my understanding that both the generator pulley and the generator 
mounting bracket, although standard Ford parts, are unique to the Tiger. The
mounting bracket moves the pulley back and the pulley positions the 
pulley slightly forward.  The net result is that the generator pulley lines 
up correctly with the crankshaft pulley.  Many years ago, I replaced the 
generator in my Tiger but kept the original generator rather than turn it in

for the core charge.  I ran on the replacement generator for years and, only

recently, discovered that my old generator had the correct pulley on it and 
that the generator that I had used for years caused a slight misalignment 
with the crank pulley.  The car is now happily using the original generator 
and pulley.  Pictures are of the refirbed original generator/pulley before 
they were installed.

Will - wseay@embarqmail.com
______________________________
"I think not therefore I am not" (anon)
-----Original Message----- 
From: spmdr--- via Tigers
Sent: Wednesday, April 08, 2015 11:52 AM
To: tigers@autox.team.net
Subject: [Tigers] Tiger Gen pulley size

The Dime test.

Way back at one of the Suni events, we needed a quick test to see if the
pulley was correct.

We found a Dime is JUST a LITTLE large to fit between the belt and the fan
blades.

The NON-Tiger pulley had no where near the room for a Dime.

DW

____________________________________________________________
Old School Yearbook Pics
View Class Yearbooks Online Free. Search by School & Year. Look Now!
http://thirdpartyoffers.juno.com/TGL3141/552540d89051540d840ffst02vuc
_______________________________________________ 

_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>