Re: Stuck Tach Cable solution

["John L. Walker" <up497@freenet.victoria.bc.ca>]

I also intend to replace the cable with a new one when I've got some 
spare currency.

My big problem was to get it to work- and as for oil & grease fouling the 
works, I've got that covered too- the coupling at the tach end has come 
off and the cable's just resting in there.  I'm going to rig it up so 
that there's a bearing holding up the shaft, or else bite the bullet and 
get the new cable now.

-Malcolm

    Too many rocks and not enough sand.