There are some more things you can check. Check you have the linkage
set out as in the book. i.e it will probebly have a leaver on the
linkage to open up the butterly(s) on that a spring, and a rod going to
the accelorator cable. Have you got that rod as neer to the butterfly
axil as posible.
Also is there an adjutment for a stop on the peadel.
The other thing to note is when I adjusted my linkage for balance, I
found it was smothe on idle, but lumpy on acceloration, so I put the
butterflys wide open, and made shure that they both were at the same
angle. This is probebly compensating for differnt year SU's on each
carb.
--
James Carpenter
Yellow '79 spit wired by a trained marmot
|