In a message dated 07-Aug-00 17:57:36 Eastern Daylight Time,
greenman62@hotmail.com writes:
> You could do it numerically... I don't have my book handy either
> however, the trick is to start with the nuts in the middle of the
> head (between 2 and 3 cylinders) and work outward to either end of
> the head it's kind of like a spiral. I'll try to do you a picture
> (see below)
>
> 8 6 1 3 9
> 10 4 2 5 7
>
> I hope it doesn't get too scrambled...
>
Greg, that is not the same as either my Haynes or the Factory manual shows.
My Haynes manual (p.27 fig1.7) and the latter (p.1-127 fig.59) both show:
9 3 1 6 8
7 5 2 4 10
With the upper numbers being the nuts under the rocker arms. Cheers.
Art Kelly
|