triumphs
[Top] [All Lists]

Re: TR3 Steering Box Rebuild

To: Bill Brewer <bbrewer@lightspeed.net>
Subject: Re: TR3 Steering Box Rebuild
From: Bob Labuz <yellowtr@borg.com>
Date: Wed, 09 Aug 2000 17:28:48 -0400
Cc: Triumphs <triumphs@autox.team.net>
Organization: Adirondack Minerals
References: <001401c00191$40431e00$b218a5d1@brewer>
Bill,

I had TRF rebuild my box 2 years ago. It doesnt leak, there is no free play. It
was worth the $$$ to me.

Bob Labuz
1958 TR3A
1974 T140V

Bill Brewer wrote:

> Hey Listers,
>      I have the front snout off of the TR3 and am installing a rebuilt
> radiator, oil cooler and other odds & ends. While in there, I decided to
> take the grease out of the steering box and fill it with 90 weight. I
> cleaned it out good and put in 90 weight which promptly started dripping out
> of the bottom past the seal (the DPO was lazy, but not stupid).
>      I have to get the car on the road this week. It has been off the road
> since June.
>
> Questions:
>      1. How hard and how long is it to rebuild the box? I read the article
> in the TRF glove box companion but wonder about real life experience.
>
>      2. Is it worth it to get a new worm gear put on by TRF or someone else?
>
>      3. Is the TRF rebuilt steering box service ($599) worth it?
>
>      4. Does Ken Gillanders do steering boxes?
>
>      I'll probably fill the box up with grease again and drive it that way
> for another 10K miles or so and then tear it all down during the winter
> months or something.
>      Any help would be appreciated.
>      Bill Brewer


<Prev in Thread] Current Thread [Next in Thread>