Hi Jim,
When I replaced mine I did it without any adhesive. Looking at the
installation I cant see how it could possible go anywhere considering it is
held down by the metal dash, the windshield frame, the three bolts at the
bottom of the windshield frame and the ashtray. I can see no evidence of any
movement of the pad. When fellow lister Rick Patton replaced his, he decided on
a little adhesive at the front of the pad. I anticipate doing a frame off resto
sometime in the not too distant future so I wanted to be able to get the pad
off without ruining it.
Aaron
Aaron Cropley
71 TR6 (Throttle Body Injection!)
http://www.triumphowners.com/108
Topsham, Maine
-----Original Message-----
From: jimhearn1@comcast.net
To: triumphs@autox.team.net
Sent: Wed, 11 Oct 2006 10:38 PM
Subject: [TR] Should glue be used for the dash top crash pad?
The top crash pad I took off my '74 TR6, which could have been the
original, wasn't attached with glue but the repair manual says to use
glue when attaching. Does anyone have any thoughts as to which way to
go with this? Thanks, Jim
________________________________________________________________________
Check out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across the web, free
AOL Mail and more.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|