Scott,
On mine both brackets appeared to be the same (except mirror images) but
they were too far apart for the sway bar bushings. I added some angle iron
on the inboard side of each bracket to support the bushings, thus:
http://www.geocities.com/wallaces_21/addco.html
Jim
===================================
I thought I would test fit a front anti-sway bar ... When I mounted the
front bumper brackets, it was clear something was not lining up
correctly......but the sway bar bushing bracket will not line up with the
bumper bracket.
Scott Suhring
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|