After a few discusions on the phone with Dan Masters, I drove my T/R 3 down to
his home in Tenn., Dan had the high priced wire crimper, heat shrink tubing
and all the original color wiring for my T/R, he soldered each and every
connection and then used the crimping tool then the tubing and this was at
each and every connection same procedure, now thats how Dan did it. "FT"
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|