triumphs
[Top] [All Lists]

Re: [TR] TR3 Grab Bar & Alloy Wheels

To: "Eric Bartleson" <ebartle@hbci.com>
Subject: Re: [TR] TR3 Grab Bar & Alloy Wheels
From: "Ibsen Dow" <flashtr3@cox.net>
Date: Tue, 8 Apr 2008 12:41:27 -0700
The grab bar is mounted with 4 ea. sheet metal screws moss# 314-190 or 323-555
depending what commission # you have. The sheet metal screws are held in place
by the 4 ea. metal clips mounted under the dash rail bracket. I don't see a
part# available any more.
If yours are missing then you can probably match them at the local hardware
store or call Moss#.
Ibsen
  ----- Original Message -----
  From: Eric Bartleson
  To: triumphs@autox.team.net
  Sent: Tuesday, April 08, 2008 11:31 AM
  Subject: [TR] TR3 Grab Bar & Alloy Wheels


     I cannot figure out how to install the "grab bar" on the passenger
  side of my TR3A.  This is about the last thing I need to accomplish in
  the rebuilding and renovating of my TR.

     I also saw a TR3 on ebay with the greatest looking alloy wheels
  with a Triumph emblem in the center. Does anyone have any experience
  with alloy wheels, and do you know where to order a set with a Triumph
  emblem?

     Eric Bartleson

     1959 TR3A almost ready to drive
  _______________________________________________

  Support Team.Net  http://www.team.net/donate.html

  This list supported in part by the Vintage Triumph Register
  http://www.vtr.org


  Triumphs@autox.team.net
  http://autox.team.net/mailman/listinfo/triumphs

  You are subscribed as flashtr3@cox.net

  http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>