I have the ARE heatshield on my TR3A as well (Florida) and I had to cut at
the front and back where the linkage interfered. Not much needed to be cut
and it works well.
On Mon, Aug 24, 2009 at 12:02 AM, Jim Wallace <grandfatherjim@gmail.com>wrote:
> How did you ever get it to fit?
> I have one for my 3a with H6 carbs but the linkage quite interferes with
> the
> shield where it makes its first bend "outward".
> I cut a chunk away but it still didn't work, for reasons I can't recall.
> Also great fun getting the nuts on! - but that's not the end of the world.
> Jim
>
>
> > From: "John A. Wise" <60TR3A@cox.net>
> > Subject: Re: [TR] TR3A fuel evaporation
> > To: Joe Curry <spitlist@cox.net>
> > Cc: Triumph car discussion Sports <triumphs@autox.team.net>
> > Message-ID: <AB1BC1B1-6CC6-4C95-92CD-3D375D73DA8F@cox.net>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > I have one of Joe's heat shield on my TR3A here in Phoenix (the
> > Devil's boot camp - if hey can make it here, Hell is a piece of cake)
> > and have had no problems!
> >
> > John
> >
> > John A. Wise
> > Glendale, AZ
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|