Hi folks,
I'm trying to remove timing cover and I'm stuck on the fan extension, the fan
is off and the bolts at the back of the
extension are loose, the two peice pulley is loose, but the extension is rock
solid.
What does the long bolt through the centre of the extension bolt to, the pulley
housing or the crankshaft? I'm
guessing the crankshaft.
If it's the latter, what sort of tool do I use to take that bolt out as it has
the oddball surface used by the hand
crank instead of a normal bolt head? I'm also guessing it will likely require
enough force that the engine will just
turn over.
Thanks,
Art.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|